Replacement Handlebar leatherette Joolz Day 2/3/+

If your the Joolz Day 3 and Day+ leatherette handlebar is starting to look worn this can be replaced to make your stroller look fresh and new again!

• Tips for maintaining leatherette handlebar/bumper bar

can easily be replaced as it's held in place with a couple of screws (Please note they require a "Torx" screw driver to remove)

However if you have a Joolz Day 2 please be aware that your handlebar may be rivetted into place and so can't simply be unscrewed by hand. 

See image below to check where and what you're looking for to confirm if you're able to easily replace your handlebar. 

If you find that your upper handlebar is attached with a rivet not a screw then it's still possible to replace however you will need to have access to a repairer who can drill out the existing rivet and re-rivet the replacement handlebar into place. 

You can purchase the replacement handlebar following this link - https://theamazingbabycompany.com.au/products/joolz-day-upper-handlebar

NOT COMPATIBLE WITH ORIGINAL JOOLZ DAY 

Please note: replacing the upper handlebar will not resolve mechanical issues with handlebar height adjustment or fold mechanism.