Fold mechanism troubleshooting summit X3

If you are unable to fold, or having difficulty folding your Baby Jogger summit X3 please check and perform the following troubleshooting:

UNABLE TO FOLD/DIFFICULTY FOLDING

• Check locking tabs on frame are unlocked.
  
  
• Ensure fabrics are not caught in the folding mechanism.
  
  
• Adjust seat to slight recline ( Backboard may be pressing on fold mechanism & stopping from
  operating)
  
  
• On the frame, the folding mechanism metal levers need to be straight to function. An upright seat
  may bend these. This will need to be straightened to allow the fold to operate.
  
  
• The Carabiner from the Pull to Fold strap is not caught/jammed in the folding mechanism. These
  should hang freely (see picture below)
  
  
• Apply spray lubricant into where the metal leavers meet the frame. We recommend Lube Rice lubricant if available, otherwise WD40 etc will work.
• Apply spray lubricant into fold joint on frame. (Remove or cover seat fabric to avoid getting lubricant on fabrics)